• It is cold applied and can be easily applied with a roller, trowel, brush or airless gun.
• High crack bridging capability
• Eksiz
• From frost and standing water
• --Maintains its physical properties at -30ºC/+90ºC.
• It is water vapor permeable and allows the applied surface to breathe.
• Excellent adherence properties
• Effective resistance to chemicals
• No toxic substances after curing.
• It is based on elastomeric hydrophobic polyurethane resin and supported with polymerized bitumen.

• It is cold applied and can be easily applied with a roller, trowel, brush or airless gun.
• High crack bridging capability
• Eksiz
• From frost and standing water
• --Maintains its physical properties at -30ºC/+90ºC.
• It is water vapor permeable and allows the applied surface to breathe.
• Excellent adherence properties
• Effective resistance to chemicals
• No toxic substances after curing.
• It is based on elastomeric hydrophobic polyurethane resin and supported with polymerized bitumen.

• For indoor applications, the environment should be well ventilated.
• Surface temperature should be +5ºC and above. Mixing of the material should be done with a special mixing device and tip not exceeding 300-- 400 rpm, and mixing should not be done with a high speed drill.
• In cold weather, packages should be kept at least 24 hours and at a minimum temperature of +15ºC before application.
• There should be no negative water vapor pressure on the application surfaces. If this is the case, special insulation against negative pressure should be applied before application.
• After application, the surface should be protected against climatic effects such as water, rain, dew, snow, hail, frost and similar until it is completely dry.
• It should be taken into account that full mechanical and chemical strength will be achieved in 7 days.

Polymex-1055-Two Component Bitumen Polyurethane Based Liquid Waterproofing Material