–Easy to apply.
–Transparent.
–UV and weather resistant.
–Low viscosity.
–Solvent free.
–They have high mechanical strength.
–Resistant to water, seawater, waste water, alkalis, acid solutions, brine, mineral oils and fuels. Uv Epoxy Transparent Resin.

Implementation:

Surface Preparation: Polymex-5005; Transparent Epoxy Floor Coating surface should be free from dust, dirt, oil and other substances that may prevent adhesion. Application should be made within the recoating period of the coating system. In case of application on old coatings, our Technical Service should be consulted for the application method. Tensile strength of the application surface 1,5 N/mm²humidity should be maximum %4. It should be ensured that the floor temperature is above +3 °C above the humidity point and it should be ensured that it will be this way for at least 6 hours. UV Epoxy Transparent Resin.

Mixing:

Polymex-5005; Transparent Epoxy Floor Coating is supplied in ready-to-use sets according to the mixture ratio. Before starting the mixture, make sure that the material temperatures are between +15/+25°C. Mixture 2/1 (100.gram/ 50.gram) Uv Epoxy Transparent Resin

Component A should be thoroughly mixed with a 300 - 400 rpm mechanical mixer fitted with an Epoxy/Polyurethane Resin mixing tip for 3 - 4 minutes without entraining air. Then, all of the B component should be poured into the A component and make sure that there is no material left in the B component. Polymex P-5005; A+B should be mixed for at least 3 minutes until a homogeneous mixture is obtained. The material on the sides and bottom of the mixing container should be thoroughly mixed. The material in the first mixing bowl should be placed in a clean bowl, allowed to rest for a while and mixed again for approximately 1 minute and used.

Polymex -5005; Transparent Epoxy Floor Coating should be applied to the surface with a squeegee or roller trowel. The surface should be combed sufficiently to minimize traces. UV Epoxy Transparent Resin

Implementation Considerations:

Polymex P-5005; Transparent Epoxy Floor Coating During application, if the ambient and surface temperature is below +8 °C or above +25 °C, suitable temperatures should be expected. In addition, application should not be made in extremely hot, rainy or windy weather. For applications to be carried out at appropriate temperatures, the materials to be used should be brought to the application area 1 - 2 days in advance and stored and adapted to the ambient conditions. In applications to be made in extremely cold weather, the ambient and ground temperature should be increased with the help of heaters, and the packages should be conditioned at +20/+25 °C to increase the workability of the material and made ready for use. UV Epoxy Transparent Resin.

Epoxy and polyurethane based floor systems should be applied by specialized applicators. The working and reaction times of resin-based systems are affected by ambient and ground temperature and relative humidity in the air. At low temperatures, the chemical reaction slows down, which prolongs the use time, coating time and working time. At the same time, consumption increases as viscosity increases. Uv Epoxy Transparent Resin.

High temperatures increase the chemical reaction and the times mentioned above are correspondingly shortened. For complete curing of the material, the ambient and ground temperature must not fall below the minimum permissible temperature. After completion of the coating, the coating must be protected from direct water contact for at least 24 hours. If water contact occurs, this will cause carbonation and softening of the coating, which will cause the coating to lose its properties. In such a case, the entire coating should be removed from the floor and replaced. Uv Epoxy Transparent Resin.

Polymex-5005; Transparent Epoxy Floor Coating is supplied in ready-to-use sets. Solvent etc. should not be added into the mixture during application.

Transparent epoxy floor covering is a material called epoxy chemical resin and used in many areas. In recent years, its use has been increasing especially in the construction sector. Its durability, which is among the features of its structure, plays a major role in increasing its usage areas. Transparent epoxy flooring not only increases the durability of the floors but also supports them to gain a more elegant appearance. It can be applied on all kinds of floors. It is also considered as a protective layer. Transparent epoxy floor coating is colorless as the name suggests. No color difference is observed on the area it is covered. It makes the floor smoother and waterproof.

The durability of the epoxy material affects the ground on which it is used. Transparent epoxy flooring is not used in areas exposed to too much weight. It is possible and very easy to repair against the risk of abrasion as a result of any accident. Since it does not hold dust, it has a high preference rate in areas where hygiene is prioritized. Uv Epoxy Transparent Resin ensures that the floor is more beautiful and uniformly smooth.

Therefore, it can be used to correct the visual appearance. On average, its thickness varies between 1 millimeter and 3 millimeters. Since it does not pass water, it also undertakes a kind of waterproofing task. It will be noticed that the details of the floor gain more clarity after being subjected to this process. It can be easily used even in the renewal of a worn floor. After the transparent epoxy floor coating process is completed, the innovation on the surface will be quite noticeable. Uv Epoxy Transparent Resin.

Cleanliness:
Tools and equipment used after application should be cleaned with solvent. Polymex-5005 can only be cleaned from the surface by mechanical methods after hardening. UV Epoxy Transparent Resin.

Storage and Shelf Life:
Uv Epoxy Transparent Resin Should be stored in its unopened original packaging, in a cool and dry environment, protected from frost. For short-term storage, maximum 3 pallets should be stacked on top of each other and shipment should be made on a first-in, first-out system. For long term storage, pallets should not be stacked on top of each other. Uv Epoxy Transparent Resin. 12 months from the date of production under appropriate storage conditions. Opened packages should be stored under appropriate storage conditions and used within 1 week. Uv Epoxy Transparent Resin.

Packaging:
Uv Epoxy Transparent Resin : 5.kg-10.kg 15.kg 20 kg in sets of 20 kg
Epoxy Resin Component A: 12.5 kg canister
Epoxy Resin Component B: 7.5 kg can

Security.Precautions:
Transparent Epoxy Floor Coating It is dangerous to approach storage and application areas with fire. Storage and application areas must be ventilated. During application, work clothes, protective gloves, goggles and masks must be worn in accordance with occupational health and safety rules. Due to the irritating effects of uncured materials, the components should not come into contact with the skin and eyes, in case of contact, wash immediately with plenty of water and soap, and in case of ingestion, consult a doctor immediately. Food and beverage materials should not be brought into the application areas. It should be stored out of the reach of children. UV Epoxy Transparent Resin.

Notes
All technical data contained in this product data sheet are based on laboratory experiments. Actual data may vary due to conditions beyond the control of AŞY POLYMEKS KİMYA SAN TİC LTD ŞTİ. Uv Epoxy Transparent Resin.