Solvent free.
It has high flexibility.
Can be used as waterproofing material.
It has high adhesion strength.

Protects against corrosion, resistant to alkalis and base acids.
Not affected by fungi and bacteria.
Provides safe use due to its solvent-free nature.
It is resistant to sunlight as it is not affected by UV rays.
It has high adherence to the applied surface and is resistant to aging.
It is resistant to water, acidic water and salt solutions, grease, oil and petroleum and is also waterproof.

(23°C ve %50 Bağıl Nem)
General Information
Color
Component A Light yellow
B component Dark brown
Shelf Life: 12 months at room temperature in closed warehouses out of sunlight
Solvent Free Polyurethane Ceramic Adhesive

It is used for bonding coating materials such as ceramic, granite ceramic to various surfaces such as concrete, metal, wood chip cement board (betopan), wood, gypsum panel ceramic floor coverings. Suitable for parquet adhesion. Used in underfloor heated floor applications. It is used for bonding thin ceramics such as coatings reinforced with mesh on the back. Used for bonding dilatation tape.

Application Information Mixing Ratio :

Component A 6.25 kg
Component B: 0.75 kg
Mixture Use Time: 45-60 minutes
Hardening Time:
%80 sertleşme 24 saat
%100 sertleşme: 1 hafta
Slip (EN 1308): ≤ 0.5 mm
Consumption: Approx. 1,5 kg/m² (on smooth surfaces, with 4x4x4 mm tooth size comb).0,75 kg/m2 for 1 mm thickness when used as waterproofing material -Solvent Free Polyurethane Ceramic Adhesive

Application Instruction:

Any dust, dirt and oil that may reduce adhesion on the application surface must be completely removed. The surface must be clean, dry and sound. Surface defects must be corrected. In underfloor heating systems, the heating must be activated 10 days in advance and must be turned off during application.

The system can be commissioned 72 hours after the application is completed. 0.75 kg B component should be mixed with 6.25 kg A component until a homogenous color is obtained. The mixture should be spread on the surface and combed with a toothed notched trowel (4x4x4 mm tooth size). For sizes of 40×40 cm and larger, application should be made with the combined bonding method. Ceramics or parquets should be adhered to the surface within 45-60 minutes.

When used as waterproofing material; the first layer should be applied to the surface with a flat trowel to form a thickness of 1 mm, after the first layer dries, the ceramics should be adhered by combing the second layer with a notched trowel. Solvent Free Polyurethane Ceramic Adhesive The expired mortar in the container should be discarded. POLYMEX 3024 should be removed from tools and surface using polyurethane cleaner. Solvent Free Polyurethane Ceramic

The packaging must not be opened until the components are used.

All technical data contained in this product data sheet are based on laboratory experiments. Actual data may vary due to conditions beyond the control of AŞY POLYMEKS KİMYA SAN TİC LTD ŞTİ.

All technical data contained in this product data sheet are based on laboratory experiments. Actual data may vary due to conditions beyond the control of AŞY POLYMEKS KİMYA SAN TİC LTD ŞTİ. Polyurea Primer Polyurea - Epoxy - Polyurethane is used in Floor Primer of Floor Coatings and Insulations. The floor is cleaned and 250-300.gram per m2 should be applied to the cleaned floor. Insulation or floor covering materials are used on it. Polyurea Floor Primer is used in risky areas. According to the seasonal conditions and the structure of the usage area, primer with different properties is used.