Özellikle Dış mekânlarda düşey ve yatay uygulamalarında; Su  Kesici Meyilli Teras balkon çatılarda Dış  cephe izolasyonlarında Zeytin  salamura tesislerinde Fayans  Altı veya Fayans üstü izolasyonlarında Beton  çinko ve prekast baca derelerde Binaların  kuzey dış cephe ve Silo depolarında Havuz  izolasyonlarında Temel  bodrum izolasyonlarında Tonajlı  İçme Su depolarında Sprey  poliüretan altı ve Sprey poliüretan üstü izolasyonlarında Banyo  ve Islak Alanların İzolasyonlarında Dış  mekân bahçe temeli ve terası izolasyonlarında Köşe  parapetlerde izolasyonlarında Surface Preparation: The surface to be treated with Polymex-1008; CAP Water Stopper Insulation Material must be thoroughly cleaned from solid dry dirt, oil, rust, etc. The surface must be dry and clean on concrete or sheet iron, fiberboard, wood, tile surfaces. Old and worn surfaces (worn, loosened and lost mechanical strength) should not be primed before the necessary repairs are made. The concrete must be set and completely dry. Uneven surfaces should be repaired with appropriate repair mortars. The corner edges of the surfaces should be chamfered with repair mortar with a diameter of 4 cm. Water should flow towards the drains. Polymex-1008 should be applied 4 hours after the primer is applied to the floor, after making sure that the floor has hardened. Two coat application is sufficient. If necessary, 3 coats can be applied. After application, a 2 mm thick dry film layer is obtained. The applied surface should not be wetted, walked on and protected for at least 12 hours. Application without primer should never be done. Polymex-1008 should be applied on the dry primer 4 hours after the primer is applied. Since it has anti-bacterial properties, it does not produce bacteria on the product. CAP Water Stopper Insulation Material Implementation: Polymex-1008; CAP Su Kesici İzolasyon Malzemesi Kullanıma hazır bir malzemedir. Astar  uygulamasında Polymex-1008 %50 su ile 400-600 devir/dak bir karıştırıcı ile 3-5  dakika karıştırılmalı ve hazırlanan malzeme Astar olarak zemine 250 gram/m²  should be applied. 4 hours after the primer application, other coats should be applied as 1st coat. 1.50 mm wet film thickness should be applied with the help of roller, brush, trowel. Polymex-1008; cracks, joints, corners and edges should be supported with 100 gr or 165 gr suitable waterproofing mesh or fiber felt after the first coat application. Consumption: Water Stopper for 1 mm dry film thickness: 1.50 kg/m² Water Cutter for 1 mm wet film thickness: 1.4 kg/m² For the thickness of gutters and streams: 2 kg/m² Waterstop on terraces and floors: 2.5-kg/m²