Surface Preparation: Surfaces must be clean, smooth, sound and dry, weak parts must be removed from the surface. Do not apply on damp surfaces. If the surface is very dusty, a primer coat should be applied beforehand with Polymex Recycling Primer. Elastomeric Resin Based, Polyester Felt Carrier Polymer Bituminous single component, super elastic waterproofing and coating material. Implementation: Elastomeric Resin Based, Polyester Felt Carrier Polymer Bituminous one component, super elastic waterproofing and coating material Avoid application in very humid and/or very hot weather. Do not apply on surfaces that are frozen, melting or in danger of freezing within 24 hours. Depending on the absorbency of the surface, primer POLYMEX-1018 % 50 water should be added and after the primer coat dries, Polymex-1018 should be applied to the entire surface in 2 coats with a roller or brush. After the first coat dries, the second coat should be applied perpendicular to the first. Wait at least 5 hours between coats. (The specified times are valid at 23° C surface and ambient temperature. At low temperatures the time is prolonged, at high temperatures the time is shortened. Elastomeric resin based, single component, super elastic waterproofing material