Areas of Use It is used as floor and wall coating in refineries, petrochemical and other industrial establishments, ports and shipyards, drinking water and fuel tanks, treatment and wastewater plants, wine storage tanks, food industry, hospital and pharmaceutical industry, laboratory, textile and automotive industry in order to protect concrete and metal surfaces from atmospheric and chemical effects. Application After mixing the base material, add the hardener and mix for 2-3 minutes until homogenous. After resting the mixture for 15 minutes, start application. Do not prepare more material than the amount that can be applied during the life of the mixture. Terms of Application New concrete and cement plaster should be cured for at least 21 days. After the mortar residue etc. on the cured surface is removed by light sandblasting or brushing, the selected primer is applied. Loose particles such as old paint, dirt, dust etc. on the old concrete and cement plaster surface are removed by sandblasting, scraping, brushing. Oil and grease residues are cleaned with detergent water, if neutralization is required, the surface is wiped with % 3-4% hydrochloric acid or acetic acid solution and washed with water. Make sure that the surface is completely dry before applying the selected primer.