Seawater resistant

High corrosion - abrasion resistance

Provides insulation

Provides insulation against water

No volume loss during curing

Resistant to mild chemicals

AREAS OF USE

It is used on metal and wooden surfaces in the production and maintenance of boats and yachts, on horizontal and vertical surfaces of areas such as tanks, tanks and pools. Marine PU Spur Sealant

Sea Group / Putun

Polyurethane based, two-component, solvent-free, seawater resistant, highly corrosion/abrasion resistant, multifunctional elastic polyurethane putty used for bonding, spur filling, caulking and coating.

Surface Preparation and Application Method:

The application surface should be cleaned from all kinds of dirt, rust, oil, loose paint layer and coating layer. The dew point should be monitored during application and should not be applied on damp or wet surfaces. Moisture and/or water may cause abnormal foaming of the product. Mix the material homogeneously with the hardener according to the mixing ratio. Let it rest for 3-4 minutes. Deep cracks and pits are filled by applying thin coats. Waiting time between coats is 4 - 6 hours. If the waiting time is more than 24 hours, a thin layer of sandpaper should be applied before continuing the application.

Thinning / Mixing Ratio:

By weight 4 parts PU Spur Putty + 1 part PU Spur Putty Hardener. It is used without thinning with thinner.

Paintable (Coatable) Area:

Approximate consumption is 150 g/m in 1 cm x 1 cm section in spur applications. In coating applications, approximately 450-500 gr of putty is required for 1 m² when the application is made to leave a 250 micron dry film. The practical coating area varies according to the surface roughness and the amount of spatter losses.

Drying Time:

Completes touch drying in 6 hours, dust holding drying in 12 hours, hard drying in 24 hours at 20°C. Completes drying for mechanical processing in 4-6 days.

Recommended Application Apparatus:

Brush Roller Spatula, putty steel, gauge.

Packaging:

5 kg - 10 kg - 20 kg

HEALTH AND SAFETY INFORMATION

Refer to Polymex instructions as indicated in the hazardous and precautionary statements on the product packaging. The product of the safety data sheet must be treated according to the instructions. For unexpected health problems, contact the nearest health facility.

LEGAL NOTES

Polymex P-7005-Marine PU Spur Sealant, All information and instructions contained in this technical bulletin have been created and developed through experience in Polymex Paint Laboratories and systematically collected by our field engineers. "Polymex" reserves the right to make changes in the product without notice. The information given above is valid from the date of publication. It is the responsibility of the user to check the accuracy of the product. It must be used for the recommended purpose based on the technical data sheet. It is the responsibility of the user to implement all measures to fulfill the conditions used. The data in the technical data sheet are intended to give descriptions of product performance under specific test conditions. Marine PU Spur Sealant An important factor in product performance are the variables that may arise in the initial operation, which should be used as a general guide for the user. Polymex Kimya cannot be held legally responsible for any unauthorized use of this product not covered in the written instructions. It is the user's responsibility to take all necessary precautions in relation to the specific requirements of the law set out in local and national legislation. Observe the rules of the safety information contained in the Polymex Kimya Safety Data Sheet regarding the operating procedure of the product, protective equipment, storage, fire and first aid, etc. The provisions of this product relating to conditions after the date of use are not covered by the warranty. We cannot accept responsibility for expired products. Liability cannot be accepted. For further information about the product, please contact Polymex Technical Service Department

It is a polyurethane-based, two-component, solvent-free, multifunctional spur sealant used for spur filling, caulking and coating.